Zip Screws for Siding

 Zips Screws for Siding

A remodeled home may be constructed of the best internal materials and have the safest and most up-to-date wiring and plumbing. But, if the exterior doesn’t look good, many possible consumers will routinely reject it. Amongst other factors, climate and environment can make siding replacement necessary over time. When deciding on siding, you may want to consider, “What are the ideal products for the job?” These products include the materials used in the zip screws used to install siding.

At All Points Fasteners, we have a wide selection of vinyl siding screws and other zip screws for drilling into vinyl siding. We’ll help you find the right screw type for your siding project to complete it efficiently and quickly.

What Are the Different Kinds of Siding?

The types of siding include:

  • Vinyl.
  • Wood.
  • Asbestos.
  • Asphalt.
  • Aluminum.
  • Hardboard.

There is no solitary siding option that suits all construction. The background of siding is lengthy, and products have become popular and then declined in favor.


The most prevalent variety today is vinyl, a plastic compound first found in 1872. It became commercially viable in the 1930s and was widely used in home construction after the 1960s. It has retained much of its popularity since that time, and vinyl for this function consumes a big percentage of production.

Many of the difficulties associated with vinyl have been overcome, allowing it to become the dominant material used today. It competes directly with aluminum. Vinyl siding these days generally covers up older products such as wood.


Wood was the predominant choice for years. When available, wood is attractive, occurs naturally, doesn’t require a chemical processing plant, and adds charm and warmth to a home. It is still a very popular form of siding, but environmental and manufacturing issues have made it less economically possible for many people. Wood must be repainted just about every few years, and damp climates can cause it to deteriorate over time.


Through the 1950s, many homeowners began to cover their home’s wooden exteriors with asbestos, prior to acknowledging asbestos’ inherent health hazards. This kind of siding was manufactured until the 1970s, and there are still homes with this form of material. Its main advantage was fire and insect resistance, but as soon as other products became obtainable, asbestos use was largely deserted.


Another economical siding alternative was asphalt. This low-cost building material was one of the least attractive options available and consisted of a base sheet covered with a thick, gooey black mixture that contains crushed rock. This material was very weather-resistant and could be disguised to look like other materials such as brick. After an initial boom during the post World War II years, the use of asphalt was eclipsed by aluminum.


Aluminum siding was also a post-war phenomenon of the second half of the 20th century. It is lightweight, relatively easy to install, and covers worn and unattractive older exteriors with a minimum of effort. Aluminum rarely needs repainting, won’t rust, and in general, has been considered a much more viable and permanent solution to external home needs.

The biggest disadvantage of aluminum is production. Creating aluminum from bauxite is energy-intensive and can be environmentally degrading. This metal is easily dented and won’t bounce back into shape.


Hardboard, a material composite of wood chips and epoxy resin, was touted as a substitute, but there were really serious moisture retention issues. Because of those issues, vinyl regained the lead in siding popularity.

What Are the Benefits of Vinyl Siding?

Vinyl has been the popular siding choice for years because of its many benefits. The advantages of vinyl siding material include:

  • Cannot dent.
  • Moisture-resistant.
  • Won’t snap in subzero temperatures.
  • Doesn’t need grounding.
  • Won’t erode.
  • Cost-effective during construction.

How Do I Decide Which Siding to Use?

Deciding on the correct material for siding installation means finding the right material appropriate to the style of construction (zip screws or tek screws, which are self-tapping, included) and overall budget. For example, using vinyl to cover the exterior of a stately Victorian home would be a mismatch and simply not look right. On the other hand, using expensive wood siding on a tract home may not be the most practical solution, either.

A very good idea is to gather samples before deciding on alternative material and look at other homes in the neighborhood to see what has worked best. Once the choices are narrowed, then it is time to start working out the details of construction with the contractor of your choice.

What Are Zip Screws and Why Should I Use Them for Siding?

Zip screws are fasteners with a threaded design and fine point that can pierce through hard materials, like siding, and create their own hole. Its penetration capability comes from its threading, which extends to the pointed end. After the first penetration, a second thread catches the material for quicker fastening. Zip screws are made with a heat-treating process for long-lasting strength.

At All Points Fasteners, many of our zip screw options have a hex head. Compared to other head styles, the hex head is more secure during and after installation. They are available with zinc plating, ceramic coating (for additional corrosion resistance) and stainless steel with ceramic coating.  All these are also available with painted heads to match your siding.  With all these options available, you are sure to find the right zip screw for your project.

Contact All Points Fasteners About Screws for Vinyl Siding Today

If you need siding screws for vinyl, come to All Points Fasteners. We have the hardware you need to get the job done and help your siding last for years. Our large selection is sure to have what you need.

For answers to your questions about zip screws for siding, contact our team by completing our online contact form or calling 800.483.6354.

Zip Screws!

Zip Screws!

Self-piercing screws, also commonly known as zip screws, are self-tapping in that they tap their own threads. They are also sometimes referred to as needlepoint screws because they will ‘self start’ with soft metals when pressure is applied. Our experience has been that the #8 x1/2 Hex Washer Head Needlepoint screws (zip screws) have reportedly worked best when used in square duct with 30 and 28 gauge metals. Contractors have stated that they have better luck with #7 needlepoints when doing round pipe with 24 and 26 gauge metals. Application is very important when choosing what screw to use in your job, otherwise, the fasteners may not perform in the way that you expected them to perform. Many fastener ‘failures’ are actually using the wrong part for the job. Although some have said that they have been able to use #7 zip screws in up to 20 gauge metals, we have been told that when working with metal 22 gauges and thicker, tek screw type screws really do the job much easier.

Self-piercing screws (zip screws) are popular with the Heating and Air Conditioning and the gutter industry. 8x 1 ½ or 8×2 Hex Washer Head Zip Screws painted white are frequently purchased for the registers. The gutter industry use mainly painted 8×1/2 hex washer head needlepoints and 10×1 1/2 Hex Washer Head Needlepoints (zip screws) although copper plated stainless steel zip screws are becoming much more popular and we are one of the few companies that supply them!

Self-Tapping Drywall Screws

Self-Tapping Drywall Screws

Self Tapping drywall screws are manufactured to be utilized with drywall which is also called plasterboard or gypsum board. Drywall is a panel made of plaster, pressed in between two thick sheets of paper. It is commonly used to produce interior walls and ceilings. Drywall sheets can be produced from fiberglass as opposed to paper for a more long lasting kind of wall. It is also used to stop the wall from being harmed when exposed to water as a result of leaks or floods.

When one is doing work with drywall, there are certain tools and equipment used. Drywall is different from a common cement or wooden wall and therefore requires different equipment and tools. For instance, normal screws should not be used when you use drywall. Instead, specific drywall screws ought to be used.

There are many different kinds of screws available to be used in several different types of tasks. Wood screws, sheet metal screws, and drywall screws are the most typical types. Some drywall screws have a coarse thread that’s meant to secure drywall to wood studs while the fine thread version of the screw is utilized for attachment to metal studs.

Drywall screws can be used for a variety of things and the type of drywall screw being utilized would depend on the project. Besides what they are designed for, listed below are a couple of other things they’re great for:

  1. Clean up a connection: prior to you deploy new fittings, use a drywall screw’s sharp point to dig old compound and tape from the pipe threads.
  2. Create a starting point for a drill: tapping a small drywall screw with a hammer chips away a small amount of glaze on a ceramic tile. This tiny “hole” will be a beginning point for the drill and will prevent it from moving around.
  3. Many cabinet installers use drywall screws for installing cabinets and also for the actual making of the cabinets themselves. A drywall screw very popular with the cabinet installers has yellow zinc plating.  The yellow yinc looks lovely with the wood and the plating gives a little added corrosive resistance as well!





As you can tell, the self tapping drywall screw may be used for more than what it’s made for. This little fastener is a trouble solver, all you should do is use your imagination and some creativeness and voila, you’ve got a remedy. See, things are not always as they seem to be!

Particle Board Screw and Chip Board Screws

Particle Board Screw and Chip Board Screws

Self-Tapping Screws

A self-tapping particle board screw is a fastener that is uncomplicated to use and works nicely on chipboards. Its body is made up of a helical ridge, also known as the external thread that is wrapped around a cylinder. Some screws need to be used with a pre-threaded insert, such as a nut or a hollow cylindrical object that the screw can be driven into.However, commonly it is the screw that is expected to cut the threads in a softer material like chipboards. The screw has a head section that provides the grip needed to turn the screw into the holder or the surface for which is it intended. The primary function of the screw is to hold the desired set of objects in place.

Type of Screws

Screws come in several designs to fit various demands. Some of the most typical ones are chipboard screws and self tapping deck screws. Chipboard screws are pretty comparable to standard screws except that the grooves on them are typically asymmetrical to permit for better resistance against pull-out. They also usually have thinner shafts that allow them to be screwed in easily.Deck screws are also comparable to chipboard screws except that they have threads running right up to the head of the screw. This gives you a lot of room to tighten the self tapping screws, even when they tend to come lose with wear and tear or abusive use.

Chipboard Screws

Installers who work with cabinets really seem to prefer chipboard screws. One of the distinctive characteristics on chipboard screws are the nibs built in underneath the head. The nibs help to countersink the screws into the wood less difficult so that pre-drilling is unnecessary which, along with the fact they are self tapping, saves them both time and money.

Self-Tapping Deck Screws

Self-Tapping Deck Screws

Deck Screws – Wood Screws? No splits, pre-drill or mushrooming Fine hardwoods, composite, & pine.

Self-tapping wood screws , and other screws, really make a big difference in the outcomes of any house project. These basic products can be the difference between a finished project that can last for a lot of years and one which may fall apart the first time you use it. Everyone has made compromises when performing project work. This is typically due to the inconvenience of having to run to the store for the little and seemingly insignificant part that simply does not appear to be worth the effort to make the trip. If you consider arrogance in your venture, you may want to rethink if that is true. If it seriously did not make a difference you may not have the multitude of options from that to choose. Wood screws come in dozens of lengths and have certain characteristics for particular uses.

One leading example of a specialty wood screw is for outside decking. Deck screws are specially coated to be rust resistant. Doing so can help decrease the chance of unpleasant rust marks from developing on your outdoor patio stretch. The rust resistant covering additionally keeps the screw from becoming deteriorated by weather conditions conditions. Because they are exposed to the outdoors, and in the case of the outdoor patio, are especially vulnerable to the elements. This is simply because the fasteners are employed on a flat surface that can pool water in the fastener holes. A failure can result should the fastener rust through. The resulting loose decking could additionally cause a safety hazard and homeowner liability. The enzymes and chemical substances employed in treated timber can be hard on the screw as well. The small expense in employing the right screws pales in comparability to the doable consequences. Recall, the covering is merely corrosion proof so to treat the outdoor patio face as needed to hold each the wood and fasteners in good shape.

Wood screws have come a long way in their overall performance and the know-how these folks employ. This technological innovation allows for greater, and lengthier long lasting benefits with your home projects. This translates into much better wanting tasks using an expert quality. One recent development in of a wood screw is the use of different drive heads. The most popular are still the Phillips head screws. The cross shaped drive head provides safe contact in between the driver and the screw. They also permit for a standard of connection offering the user the ability to do the job on different planes while taking care of control of the fastener. The sq disk will take doing so connection separating app and screw and creates a contact point which not only supply much better grip during the drive, but attaches so snugly that you can do the job upside straight down or sideways without losing contact using the drive head. The regular fastener head has its uses, but for comfort the sq drive and Phillips head offer added control.

The design of a wood screw is being founded on the particular characteristics of how wood works using the fastener. If you evaluate a metal screw to a wood screw you will see most differences. The wood screw is tapered producing the connection more safe. A metal screw does not possess this taper, and because of doing so, must not be employed in wood applications. The screw can have a propensity to again from the hole leading to the joint to fail. Wood screws usually do not possess threads that extend all the way to the screw head. This feature helps keep the fastener firmly in place. The best advice is if you do have a wood venture, use self-tapping wood screws for an ideal result.