What Is the Purpose of a #4 or #5 Tek Screw Point?

What Is the Purpose of a #4 or #5 Tek Screw Point?

Tek screws are an invaluable tool to have at any job site. They work well for a variety of applications and can greatly reduce the amount of time you spend drilling screws. However, not all Tek screws are built the same. They are differentiated by a number, such as #4 and #5.

We’ll explain what these numbers mean and the best occasions and installation methods for Tek 4 and Tek 5 screws. All Points Fasteners has the domestic quality screws and fasteners you need for all of your projects at imported prices.

What Do the Numbers for Tek Screw Points Mean?

Tek screws, also called self-drilling screws, are self-tapping in the same way as a sheet metal screw. The difference is that it has a drill-shaped point that can cut through the material, eliminating the need for drilling a pilot hole. Tek screws are made with hard metals like stainless steel and can drill into soft steel or metals where the drill point is harder than the metal it’s drilling into.

Self-drilling screws have drill bit tips which are numbered from #1 up to #5, indicating the length of the flute.  The flute is the part of the Tek screw that determines the metal thickness the screw can drill into. That means the bigger the number, the thicker the metal it can go through without a pilot hole. The capacities of Tek 4 and Tek 5 screws are:

  • Tek 4: The #4 point can drill through steel that is 0.25 inches — or 6.35 millimeters — thick.
  • Tek 5: The #5 point can drill through 0.5 inch — or 12.7 millimeters — of steel.

When to Use Tek 4 and Tek 5 Screws

Tek 5 and Tek 4 screws work well for a variety of applications that are metal to metal or wood to metal, like:

  • Electrical industry
  • Roofing
  • Machinery
  • Carpentry
  • Steel studs
  • Outdoor and exterior

For all of these uses, Tek screws will provide a secure grip. Tek 4 and Tek 5 screws are also a good choice for products that you may be taking apart for maintenance or rebuilding regularly, such as air conditioning units and canopies.

How to Ensure Tek Screws’ Capacity and Quality

Contractors sometimes question the quality of their Tek screws when the fasteners break. However, it is not a poor quality that causes the break. The reason for the screws snapping is that they are being used in an application they were not designed for. The screw may snap off, or the shank may twist and break when the screw is drilled into steel too thick for it to manage.

Here is an example that illustrates a simple reason for heads of Tek screws snapping. In this example, we will refer to the 12-24X7/8 Hex Washer Head Self Drilling Screws (Tek Screw ). The numbers in this name indicate:

  • 12: The size of the shank. The bigger the number, the thicker the shank.
  • 24: The number of threads per inch, also known as TPI.
  • 7/8: The measurement from underneath the head to the tip of the screw.

With a common Tek screw, the front of the screw will be drilling in slower while making the pilot hole than when the threads of the Tek screw catch the material. Once the threads catch, the fastener will turn as fast as the TPI. In other words, if the fastener is 16 TPI, the screw will go in the material 1/16 inch each time it turns.

This is where you may run into a problem. If it is a thick piece of metal, the threads will catch before the drill bit is done drilling through the metal. This will cause the front of the screw to move slower than the back of the fastener, and the screw will break.

For this example, there is a simple solution to prevent the screw from snapping. By making the drill bit of the screw extend longer up the shank of the fastener and changing the threads per inch to a finer thread than 24 threads per inch, the front and the back of the fasteners will move at the same time, and the screws won’t break.

Purchase Your Tek 4 and Tek 5 Screws From All Points Fasteners Today

All Points Fasteners is your one-stop shop for Tek screws and other quality fasteners. Whether you are a contractor for HVAC, roofing or another job, we have just what you need to get the job done right the first time. We have a large selection of screws available, so you can find what you need with ease. If we don’t have what you are looking for, we will get it for you, no matter how uncommon it is.

At All Points Fasteners, we offer more than high-quality products — we provide helpful customer service. When you come to us with your fastener needs, we will do our best to give you the right answer.

We are happy to answer all of your questions about Tek screws. Get in touch with us today by filling out the contact form on our website or calling 800-483-6354.

Zip Screws and Tek Screws, The Most Popular Self-Tapping Screws

Zip Screws and Tek Screws, The Most Popular Self-Tapping Screws

Self-tapping screws, such as zip screws and tek screws are ideal for jobs when you plan to attach material that are of different kinds, such as wood to metal, metal to plastics and metal to metal. Self tapping screws are extremely versatile and simple to use since they will tap their own threads as you drive them into your material, and this in turn will save you time and time equals money! There are many kinds of self tapping screws you can buy today and they each have their own purpose.

There are basically two types of popular self tapping screws available, zip screws and tek screws. Type A screws are also self tapping, as they tap their own threads, however, they are not as popular as they normally need a pilot hole to get them started. There are two types of tips for self tapping screws and that they are the self piercing screw, also known as zip screws, and the other is the drill bit tip, [tek screws] tek screw type. Self tapping screws can sometimes need a pilot hole which is much smaller than the diameter of your self tapping screw, this way your screw can have enough material to create its thread and attached itself into.

While self piercing, zip screws, can pierce its own hole and create its own threads on the process of driving them, this is usually done with thinner gauges of metal starting at 24 gauge.

ip screws and tek screws are readily available to help save you time and money.